此前，我们参观了比亚迪在Xi的的工厂。事实上，就在上次参观的同时，比亚迪在这座古城的第二家工厂也在有序生产。这是比亚迪投入使用的新工厂，最高设计年产能为40万辆。再加上最大设计年生产能力30万辆，比亚迪仅在Xi的的最大生产能力就可以达到70万辆！
0
1
2
3
[page]
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
[page]
9
0
1
2
3
4
5
6
7
8
9
0
1
2
Editor's summary:
A brief visit to the factory will certainly not present the detailed content-jndp and comprehensive information as we did before. Although the visit process is very hasty, we can still have a preliminary understanding of the factory through the only set of pictures.
The stamping workshop has the ability to start multiple stamping lines at the same time. However, according to the situation we have seen, the automation degree of the open stamping line is not high, but we will have to wait for a more in-depth visit in the future before we can give a reasonable conclusion to the whole stamping workshop. However, it is a condition that many other factories do not have.
The main welding line in the welding workshop is the production line with the highest degree of automation in the whole welding workshop, and to evaluate the automation rate of a welding workshop, all sub-assembly lines should be included in the comprehensive evaluation. This time, the production situation of sub-assembly lines is missing in the article because of the visit time, and we will make up the relevant content-jndp next time.
The visit time of the painting workshop was short, and the water-based paint left a deep impression on me. After all, some joint-venture brand factories still use oily paint that is not conducive to environmental protection, which should be affirmed by BYD Xi 'an No.2 Factory.
As far as the assembly workshop is concerned, we are more concerned about the layout of the sub-assembly line. At ……
目前，我们对它的信息很少，但现在，仪表板和车门都是在主装配线上组装的。如果我们能有自己的子装配线，就更容易控制装配质量。此前，我们参观了比亚迪在Xi的的工厂。事实上，就在上次参观的同时，比亚迪在这座古城的第二家工厂也在有序生产。这是比亚迪投入使用的新工厂，最高设计年产能为40万辆。再加上最大设计年生产能力30万辆，比亚迪仅在Xi的的最大生产能力就可以达到70万辆！
0
1
2
3
[page]
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
[page]
9
0
1
2
3
4
5
6
7
8
9
0
1
2
Editor's summary:
A brief visit to the factory will certainly not present the detailed content-jndp and comprehensive information as we did before. Although the visit process is very hasty, we can still have a preliminary understanding of the factory through the only set of pictures.
The stamping workshop has the ability to start multiple stamping lines at the same time. However, according to the situation we have seen, the automation degree of the open stamping line is not high, but we will have to wait for a more in-depth visit in the future before we can give a reasonable conclusion to the whole stamping workshop. However, it is a condition that many other factories do not have.
The main welding line in the welding workshop is the production line with the highest degree of automation in the whole welding workshop, and to evaluate the automation rate of a welding workshop, all sub-assembly lines should be included in the comprehensive evaluation. This time, the production situation of sub-assembly lines is missing in the article because of the visit time, and we will make up the relevant content-jndp next time.
The visit time of the painting workshop was short, and the water-based paint left a deep impression on me. After all, some joint-venture brand factories still use oily paint that is not conducive to environmental protection, which should be affirmed by BYD Xi 'an No.2 Factory.
As far as the assembly workshop is concerned, we are more concerned about the layout of the sub-assembly line. At ……
目前，我们对它的信息很少，但现在，仪表板和车门都是在主装配线上组装的。如果我们能有自己的子装配线，就更容易控制装配质量。
标签：比亚迪
9月23日，十几辆上汽荣威新能源车出现在了北京汽车博物馆的门口。
1900/1/1 0:00:00在全球汽车论坛第五届年会GAF2014上，针对环保和新能源汽车，
1900/1/1 0:00:00今年以来，随着国家一系列鼓励电动汽车发展的政策相继出台，电动汽车开始大踏步走进普通消费者家中，有报道称，仅北汽E150EV前8个月就卖出3000多辆车。
1900/1/1 0:00:00为了提振福克斯电动版萎靡不振的销量，福特日前对这一车型实施了上市以来的第二次大幅降价。
1900/1/1 0:00:00当比亚迪插电式混动车型秦的累计销量逼近1万辆时，王传福认为自己找到了那把启动新能源汽车市场的“钥匙”。“之前，消费者不买E6的账，是因为有里程焦虑，现在插电式混合动力解决了这个问题。
1900/1/1 0:00:002014年10月1617日，第五届全球汽车论坛在中国武汉举行。本届论坛由贸促会汽车行业分会主办，以中国汽车产业转型升级之智慧与远见为主题。
1900/1/1 0:00:00
汽车导航